The customized roller shutter remote control can only be used normally after pairing. Then, how to match the roller shutter remote control? Let’s follow the customized roller shutter remote control factory to find out.
Customized roller shutter remote control factory It is recommended to clear the code first, the roller shutter will be equipped with a remote control, press the two buttons on the remote control at the same time when pairing, and release when the indicator light keeps flashing. At this time, the code is cleared successfully, that is, the original Data; after pairing the code, press and hold the door open button of the two remote controls at the same time. When the indicator light flashes, it means that the pairing is successful.
What should I do if the customized roller shutter remote control is broken?
The remote control can be repaired by re-pairing the code of the remote control. The specific methods are as follows:
1. First of all, we need to prepare the remote control of the rolling door and the remote control key to be paired. 2. Then, you need to pull the buckle on the side of the remote control to open the cover of the remote control. 3. Next, activate the code matching switch inside the remote control. 4. At this time, you need to keep pressing the up button on the remote control of the rolling door. 5. When the code pairing light is flashing, press the down scroll key on the remote control, and the code pairing on the remote control is successful.
The method of repair and inspection of customized roller shutter remote control:
1. First of all, carefully check whether the thin wire of the motor receiving antenna is hung up as often as it is said. 2. Then, the receiver is cleared according to the command signal in the motor program, and the remote control code is used. 3. If the above methods cannot solve the problem, you can only ask professional maintenance personnel to repair it.
