Omnidirectional DC 12V RF Universal Remote Control on sales, including a base, a rotating shaft and a motor are fixedly connected to the upper surface of the base, a bearing is sleeved on the surface of the rotating shaft, and the top of the bearing is connected to the lower part of the rotating plate. The surface is fixedly connected, and the surface of a bearing is clamped with a driven gear, the right side of the driven gear is meshed with a driving gear, and the lower surface of the driving gear is fixedly connected with the output shaft of the motor. The omnidirectional DC 12V RF Universal Remote Control on sales, by setting the motor, the angle of the remote control body is easy to adjust, so that the motor rotates with the driven gear through the driving gear, and the position of the remote control body follows the base by setting the roller. When the position of the remote control body needs to be moved, the two electric push rods are retracted by operating the control switch, so that the brake plate is separated from the roller, so that the position of the base is easy to adjust.
The above is a brief introduction to some knowledge about the omnidirectional DC 12V RF Universal Remote Control on sales.