Quanzhou Juhui Electronics Co., Ltd!
Product classification
3-channel sliding door receiver and remote control
Product number:
Classification:
Key words:
Product Introduction
3-channel sliding door receiver and remote control
Description
A. Features
1. When learning the remote control code, you can directly choose between bistable (continuous output) or monostable (momentary output).
2. The receiver is easy to use. We can produce them with different code remotes according to your requirements. This receiver is widely used in motorcycle alarm receivers, electric vehicle alarm receivers, sliding door receivers, car door receivers, rolling door receivers, ceiling fan receivers, etc.
B. Function LED
Green LED power indicator, Red LED learning code indicator, Learning code S1 monostable learning button, S2 bistable learning button
Using monostable learning code:
First relay: Press S1 once, the red LED lights up (about 1 second) and flashes once (receiving remote control signal).
Second relay: Press S1 once, the red LED lights up (about 1 second) and flashes twice (receiving remote control signal).
Third relay: Press S1 once, the red LED lights up (about 1 second) and flashes three times (receiving remote control signal).
Fourth relay: Press S1 once, the red LED lights up (about 1 second) and flashes four times (receiving remote control signal).
Now keep the remote control and receiver off, press any key on the remote control, if the password is successfully learned from the remote control, the red LED will go out and the relay will close. If the remote control does not receive a signal within 5 seconds, the red LED will go out and automatically exit the learning code mode.
Using bistable learning code:
First relay: Press S2 once, the red LED lights up (about 1 second) and flashes once (receiving remote control signal).
Second relay: Press S2 once, the red LED lights up (about 1 second) and flashes twice (receiving remote control signal).
Third relay: Press S2 once, the red LED lights up (about 1 second) and flashes three times (receiving remote control signal).
Fourth relay: Press S2 once, the red LED lights up (about 1 second) and flashes four times (receiving remote control signal). Now keep the remote control and receiver off, press any key on the remote control, if the password is successfully learned from the remote control, the red LED will go out and the relay will close. If the remote control does not receive a signal within 5 seconds, the red LED will go out and automatically exit the learning code mode.
(3): Clear password: Long press S1 or S2 for 5 seconds, the red LED will flash and then go out, indicating that the password has been cleared successfully.
Note: If the code is accidentally deleted, the unit system will not be able to recover it.
Sales Team
Certification
Shipping
Previous:
The next one:
Online Consultation
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Message
Contact Us
Address: 288 Changxing Road, Quanzhou City, Fujian Province
E-mail: alee@juhuico.com
Phone: 86-59522622065