Quanzhou Juhui Electronics Co.,Ltd.
Categories
Related Products
Garage Door Remote Replacement
Sliding gate opener receiver
Remote Control Duplicator JH-TX278
Infrared Beam Sensor for Roller Shutter Garage Door - Photocell - NC or NO
4 Button 433.92 Garage Door Remote Control
4button 433.92mhz Garage door remote control
Technology parameter
| Operating voltage | DC12V |
| Operating Current | <=12mA |
| Operation frequency | 303MHZ/310MHZ/315MHZ/433.92MHZ optional |
| transmit Power | >=10mW |
| transmission speed | 50-60KHz |
| Frequency windage | ±0.2MHz |
| transmission distance | 100meters (open space) |
| Oscillation resistance | Per customer's request |
| Chip and operating mode | Hopping code(HC301,300,200 and so on) Fixed code(2262,2260 and so on) Learning code(1527,2240,HT6P20B,HT6P20D and so on) Copy code |
Characteristic
1. Various crust for your choice
2. Material: Metal and PVC
3. Encoding type: fixed/learning/rolling code/copy code
4.High stability:Adopting imported SMT component SAW and super high frequency Audion(6.5G)
Product image
Shipping ways:
How to operate ? please kindly check following
1. While pressing the button 1 of the duplicator? at the same time press 4 times the 2 button.
2. Release both buttons. Now the duplicator RED LED emits a short flash every 2 seconds.
3. Place the original remote control to be programmed in front of the duplicator? at about 5 cm of distance (as shown in
the picture).
4. Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of
duplicator RED LED and a change of its color (BLUE) that confirms the correct learning of code. This step may take a few
seconds and during that the color LED is RED.
5. While the BLUE LED is flashing, press the button of the duplicator?where you want to program the code just learnt, and
retain pressed until the LED switches off and an extended sound "BEEP"for a reconfirmation of the correct code learning.
This step may take some seconds.
6. The copy has been happened with success. Now check on the automation the correct
functioning of the new duplicator remote control.
Notes:
If the RED LED flashes only 3 times (of RED color) and switches off, the code has not learnt correctly. Please repeat
the operation from the step 1.
The duplicator memory is completely re-writable.
To duplicate further buttons of duplicator, please repeat the operation from the step 1.
Company and factory
Use range
Packing:
For order:
1, Accept OEM.
2, Print logo on the case and package
3, Payment Details :30% deposit,70%balance before shipment.Payment accept T/T and western union optional.
4, Minimum Order:100 pcs (accept trial order)
5, Delivery Details:within two weeks.
MESSAGE
CONTACT US
ADD:No.288 changxing Road,Huoju Industrial District,Licheng Area, Quanzhou,Fujian,China.
E-mail:qzjuhui@163.com
Tel:86-59522622065
