Garage Door Remote Replacement
Sliding gate opener receiver
Remote Control Duplicator JH-TX278
Infrared Beam Sensor for Roller Shutter Garage Door - Photocell - NC or NO
4 channel 12-24V AC tubular receiver
Application: It can be used in rolling blinds, rolling doors, projection screens, pumps, conveyors or other appliances and equipments with AC motors, it can remote control AC motor rotates in the positive or reversal direction.
Wireless control, easy to install.
You can rotate a motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance.
The RF wireless signal can pass through walls, floors and doors.
Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK, France
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
First, product technical parameters
Input voltage: AC220V Remote control distance ≥ 50 meters
Second, the reverse operation of the code
● Code learning
Short press the “LEARN” button and then release, the indicator light goes out, press any button on the remote control, the indicator light flashes for 3 seconds and then turns off, indicating that the code is successful.
●Remote distance code learning
Press the first button and the second button of the remote control at the same time, the indicator light goes out, press any button of the other remote control, the indicator light flashes for 3 seconds and then turns off, indicating that remote distance code is successful.
● Delete code
Press and hold the “LEARN” button for about 10 seconds while in standby, the indicator flashes for 3 seconds,then deleting code finished.
●Switch motor direction
Press and hold the “Lock” button on the remote control the motor indicator flashes, indicating that the motor direction has been switched successfully.
The Exhibition Show