Quanzhou Juhui Electronics Co.,Ltd.
Categories
Related Products
Garage Door Remote Replacement
Sliding gate opener receiver
Remote Control Duplicator JH-TX278
Infrared Beam Sensor for Roller Shutter Garage Door - Photocell - NC or NO
Remote door control system
Remote door control system
Technology parameter
| Operating voltage | DC12V |
| Operating Current | <=12mA |
| Operation frequency | 303MHZ/310MHZ/315MHZ/433.92MHZ optional |
| transmit Power | >=10mW |
| transmission speed | 50-60KHz |
| Frequency windage | ±0.2MHz |
| transmission distance | 100meters (open space) |
| Oscillation resistance | Per customer's request |
| Chip and operating mode | Hopping code(HC301,300,200 and so on) Fixed code(2262,2260 and so on) Learning code(1527,2240,HT6P20B,HT6P20D and so on) Copy code |
Product image
Characteristics:
1.Various crust for your choice
2.Materail:Metal and PVC
3.Encoding type:Fixed/learning/rolling code(optional)
4.High stability:Adopting imported SMT component SAW and super high frequency audion(6.5G)
Main tech Data:
1.Operating voltage: 9V
2.Operating Current:<=12 m A
3.Operation frequency :303MHZ /310MHZ /315MHZ /433MHZ
4.Transmit Power>=10mW
5.Transmission speed:50-60KHz
6.Frequency wind-age: ±0.2MHz
7.Transmission distance: 100 meters (open space)
8.Oscillation resistance:Per customer's request
9.Chip and operating mode:Hopping code(HC301,300,200 )
Fixed code(2262,2260 and so on)
Learning code(1527,2240,HT6P20B,HT6P20D )
Duplicate code:
Put the original transmitter and duplicator, press Arming duplicator and original transmitter3 seconds, later LED begins to flash steadily, then release button,the code will be duplicated successfully.
Resume:
When remove the code carelessly, press starting and searching at the same time,20 seconds later LED begins to flash steadily,then release both button and the code will be resumed successfully
Remark:
1)When you use duplicating remote control to copy ,please clear the existing code of in this remote control firstly .
The following is a method of testing whether the existing code in duplicating remote control is cleared or not .
When you end to clear code, you can press any key of duplicating remote control ,If LED light does not flash immediately ,
it shows the code is cleared ; if LED light flashes immediately , it shows the code is not cleared .
2)The duplicating remote control can only copy fixed code and learning code remote control , cannot copy rolling code , for example:HCS301.
Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
Works with the following remote control modules (please check your existing remote control before ordering):
Your remotes also should be Fixed code or Learning code.
These chip codes supported attached below:
PT2260 , PT2262 , PT2264, PT2240 , SC2260, SC2262 , CS5211 ,
HX2260 , HX2262 , HS2262 , EV1527 , HS1527 , HS2260 , FP527 ,
HX1527 , SMC918 , AX5026 , SMC926
Company:
2)Copy ways.
1. Vehicle central locking systems
2. Garage doors
3. Electronic gates
4. Electrical appliances
5. Car sunroofs
6. Heating system
1.Your inquiry related to our products or prices will be replied in 12 hours
2.Well-trained and experienced staffs to answer all your enquires in fluent English
3.OEM&ODM,any your customized products we can help you to design and put into production
4.Protection of your sales area, ideas of design and all your private information
5.Deliver by air mail or ship for your orders
MESSAGE
CONTACT US
ADD:No.288 changxing Road,Huoju Industrial District,Licheng Area, Quanzhou,Fujian,China.
E-mail:qzjuhui@163.com
Tel:86-59522622065
