Quanzhou Juhui Electronics Co., Ltd!

Home page

Product classification

12-24V battery infrared photocell

Product number:

Classification:

Infrared beam

Key words:

Infrared beam

The photocells are designed to detect obstacles in automatic door and gate installations, preventing collision with the door/gate. They consist of an infrared transmitter module (TX) and a receiver module (RX). If a person or object interrupts the beam of light emitted by the transmitter (TX) (or if the beam does not reach the receiver due to failure or loss of setting), the receiver (RX) activates the corresponding relay and notifies the installation control unit.

Online

Product Introduction

The photocells are designed to detect obstacles in automatic door and gate installations, preventing collision with the door/gate. They consist of an infrared transmitter module (TX) and receiver module (RX). If a person or object interrupts the beam of light emitted by the transmitter (TX) (or the beam does not reach the receiver due to failure or loss of setting), the receiver (RX) activates the corresponding relay and informs the installation control unit.

Brand name:	JUHUI or CUSTOMIZED
Model Number:	JH-IR05
Parameter:	Active infrared beam sensor
How to use it:	Please check the manual
Receiving range:	Between 15m-20m
Usage	It works for garage door/barrier gate/sliding door etc.
Frequency	433.92MHz
Power supply	RX:3V TX:12 -24V AC/DC
Power consumption	TX: 0.1mA RX: 17mA
Rotation angle	180

INSTALLATION:

(1) Install the receiver (RX) away from direct sunlight

(infrared radiation).

(2) Choose a location for the transmitter and receiver equipment.

The two modules should be as aligned as possible.

(3) The installation height of photocells will depend on the installation

(in general, we recommend installation at a height of less than

300mm from the ground and at a distance of less than 200mm

from the leaf of the gate).

(4) Connect the electrical power supply. When the receiver correctly

receives the beam sent by the transmitter, the NC contact remains

closed and LED light off. When the beam is interrupted, the NC

contact opens and LED light on.

Application:

Mainly applies to Barrier Gate, Motorcycle Alarms, Car Alarm, Home Alarms, Panic Buttons, Garage Door, Rolling Curtain etc.

Our workshop

Reflective infrared photoelectric tube

The next one:

12-24V Infrared Photocell

Online Consultation

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.

Product Name:

安全验证

Security verification

Submit

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Address: 288 Changxing Road, Quanzhou City, Fujian Province

E-mail: alee@juhuico.com

Phone: 86-59522622065

Business License

Powerby:300.cn Quanzhou SEO